Strip curtain T0 (clear)                    

Clear T0 Strip Curtains (Cuttings)

Clear Protective Curtains T0
(not suitable for arc welding)

The strips are mounted so that they swing backwards and forwards, making it easier to pass through the strip curtain and resulting in less stress on the mounting points. SINOtec recommends mounting the strips to the pipe using the tried and tested TransTac 'swing clamp'.

In addition to the appropriate punching (4 x 6 mm), the swing clamps are very cost effective and are also very easy to assemble due to a half-shell construction of the
clamps. You can also install the pipe and fit the strips at a later time.

When passing through the strip curtains with a forklift there are enormous tractive powers created which a standard swing clamp cannot diffuse. In this situation we
recommend the use of heavy-duty swing clamps or rocket shells. Also, if there is a high opening or thicker strip material is used then heavy-duty swing clamps or rocket shells should be chosen due to the high weight. Please let you advise.

Strips T0 with Hole Punching for TransTac Swing Clamps 4 x 6 mm

Strips T0 with Hole Punching for TransTac Rocket Shells 4 x 8 mm